4. Tap Continue.
Add lamp end-of-life indicator
Specify the number of hours remaining before issuing an end-of-life indicator for the lamp.
1. On the touch panel controller, tap Menu > Lamp > Lamp life warning at (hours).
2. To specify the number of hours remaining before issuing an end-of-life indicator, enter a value
or use the plus and minus buttons to increase or decrease the value.
A value of zero disables the feature.
3. Tap OK.
When the specified number of hours is reached, a Lamp Hours - past expiry warning is issued.
Work with lenses
The lens mount secures the projection lens to the projector and provides setup adjustments to
correct boresight, and control focus, zoom, and offset.
Select a channel
The projector uses pre-configured channels to determine how to display images from different
sources. Each channel file contains the optimum processing and display settings for the source.
Channels can be selected through the Home tab on the touch pad controller (TPC).
Enable warping and blending
Use edge blending to combine several projected images into one single, seamless image. Use
warping to project images on any surface shape.
1. Create the warp and blend files using the Twist application
For details, see the
2. Upload the warp and blend files to the projector.
For details, see the
3. On the touch panel controller, tap Main > Configuration > Geometry.
4. To select a warp setting, tap Geometry Correction and tap the required warp.
5. To select a blend setting, tap Edge Blending and tap the required blend.
6. To select a black level blend setting, tap Black Level Blending and tap the required black level
blend.
Mirage 4K35 User Manual
020-101377-03 Rev. 1 (07-2015)
Twist 2.0 User Manual (P/N:
Twist 2.0 User Manual (P/N:
020-101380-xx).
020-101380-xx).
Operation
60