Lamp Power / Liteloc™ Setup Window - Christie CP4220 User Manual

6.14.1 Lamp Power / LiteLOC™ Setup Window
LiteLOC™ is a power control algorithm that increases the power level to maintain lamp brightness as the lamp
ages. Tap Menu > Advanced Setup > Lamp Power/LiteLOC™ Setup.
1
Figure 6-17 Advanced Setup: Lamp Power / LiteLOC™ Setup Window
Table 6.12 Advanced Setup: Lamp Power / LiteLOC™ Setup
Control
1: Power %
2: Enable
LiteLOC™
3: Light Meter - Set
Target
4: Amps, Volts,
Watts, ~FL or
2
~cd/m , Hours
5: Text Region
6: Light Bar
CP2220 User Manual
020-100690-02 Rev.1 (1-2012)
2
3
Description
The percentage of power to supply to the lamp. See 6.14.2 for the valid Lamp Power ranges for
specific lamp types.
Applies LiteLOC ™ to the current channel.
Automatically enables LiteLOC
Light Meter value is an arbitrary unit of measure, not lumens or fL.
Lamp current in amperes, lamp voltage in volts, lamp power in watts, approximate Foot Lamberts
reading on the light sensor (assuming a calibration was performed), and hours on current lamp.
The current light sensor reading in arbitrary units-of -measure and does not represent actual lumens
or fL.
The current light intensity and LiteLOC
4
™ and maintains the current brightness level as long as possible. The
target.
™
Section 6: Projector Menus
5
LiteLOC™
6
Target
Light
Intensity
6-25