Channel Setup Instructions - Christie Solaria CP2220 User Manual

Channel Setup Instructions

Channel Setup: Config 1 Settings for 3D Configurations
1
Table 3.43 Channel Setup: Config 1 Settings for all 3D Configurations
Feature
1: Channel Name
2: Input*
3: Data Format*
4: Source File
5: Screen File**
*
The following settings are CRITICAL and are used specifically for 3D cinema presentations. Wrong settings on these parameters will
destroy the image.
**The screen file needs to be edited for your theatre.
Input - This tells the projector that we are using both HD-SDI inputs.
Data Format - This setting tells the projector how the data is formatted. Any other setting will not work.
Source File - The Source file will either be flat or scope format, and either 1998 or 2048 containers
Screen File - These files will be set for scope and flat presentations.
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)
2
3
4
5
Figure 3-68 Channel Setup: Config 1 Settings for 3D Flat 1998 x 1080
3D Flat 1998x1080
3D Flat 1998x1080
292-Dual
YCrCb 4:2:2 10 bits x2
1998x1080 1.85 Flat
Flat
3D Scope 2048x858
3D Scope 2048x858
292-Dual
YCrCb 4:2:2 10 bits x2
2048x858 2.39 Scope
Scope
Section 3: Operation
3-87