Channel Setup Windows - Christie Solaria CP2220 User Manual

3.5.6 Channel Setup Windows

Required permission level - Advanced, Administrator, or Service.
Channels are projector presets that control how the projector handles and displays different content/inputs on
the projection screen. In general, the options available through the Channel Setup window enable users to
tailor projector processing for any type of incoming source, including 3D material, and collect these settings
into a unique channel that any user can select from the Main panel. Up to 64 channels can be defined.
The Channel Setup: Config 1 and Config 2 windows consist of numerous display settings that can be
adjusted and collectively saved as a custom setup or channel. Nine channels display as buttons directly on the
Main panel while all 64 channels are accessible by clicking the All Channels button. You can activate a
channel by selecting the proper channel from the Main panel or selecting the Channel Name in any Channel
Setup window and clicking the Activate button. The status bar shows the active channel. (Figure 3-14)
5
7
9
Table 3.11 Channel Setup Window
Control
1: Channel
Name
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)
1
6
8
Figure 3-14 Channel Setup Window
Description
In the Channel Name list, select a channel to display its settings. Channels are displayed with the format
#: Name where # is the channel number and Name is the name of the channel. To determine the current
active channel, refer to the second item in the status bar. If the current channel is the active channel, a
check mark displays beside the Launch Dialog button. NOTE: Selecting a channel from the Main panel
does not change the channel listed in the Channel Name list. You must manually select the channel from
the list to see the settings for the active channel.
3
2
Active Channel
Section 3: Operation
4
3-21