Christie Solaria CP2220 User Manual page 122

Section 3: Operation
5. From the Type drop-down
menu select the type of
lamp you are installing.
6. Click the
access the On Screen
Keypad and manually
enter the serial number of
the lamp (Figure 3-62).
7. From the Reason for
Change drop-down menu
chose from:
• Regular Lamp Maintenance (Lamp Life)
• Regular Lamp Maintenance (Internal)
• Regular Lamp Maintenance (General)
• Lamp Test
• Lamp Failure
• Lamp Exchange for Increased Brightness (3D)
• Lamp Exchange for Decreased Brightness (2D)
8. Enter the Lamp Expiry (Hours) and the number of Hours Used.
9. Click Save.
10. Initial LampLOC
followed by the secondary LampLOC
3-78
button to
™
Auto Adjust begins (Figure 3-63). Once this is complete lamp warm-up is initiated,
Figure 3-63 LampLOC™ Auto Adjust
Figure 3-62 Add Lamp Window
™
adjust. This takes approximately 15 minutes.
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)