Aux Lens; Lens Adjust - Christie Solaria CP2220 User Manual

Control
10: Operational Status
11: Status Bar*
Menu Button
Status
*
Every window in the user interface has the same title bar (top of the window) and status bar (bottom of the window).

Aux Lens

The optional auxiliary lens mount widens the image for scope cinema display. Click the Aux Lens IN button
to engage the auxiliary lens in front of the projector. NOTES: 1) The Aux Lens button is used to temporarily
override the Auxiliary lens position that was defined in the Channel Setup: Config 1 window for that channel.
2) The Auxiliary Lens Mount is an option that may or may not be installed.

Lens Adjust

The optional motorized Intelligent Lens System (ILS) adjusts the Focus, Horizontal (X) and Vertical (Y)
Offset, and Zoom settings automatically. (Figure 3-2). NOTE: The Intelligent Lens System is an option that
may or may not be installed. If the ILS is installed, ensure the ILS Installed check box in the Advanced Setup:
Lens Setup window is selected.
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)
Description
Shows the status of top-level functionality in LED-like format to mirror the face-
plate LEDs. Functionality includes Projector Intelligence Board (PIB), TI Elec-
tronics Integrated Cinema Processor Board(s) (ICP), Link Decryptor (LD),
Internal Media Block (IMB), Standby Power, Main Power, Run, and Marriage.
Green LEDs mean the system is running properly. Red LEDs require attention. If
an LED is red, click the Status LED button at the top, left corner of this panel to
open the Status window.
The Menu button is the starting point to the user windows. Clicking this button
opens a two layer menu system populated with available windows based on your
permission level. Refer to
right corner of every window shows the logged in user, the active channel, as
well as the status of the Power, Lamp, Douser, and Aux Lens. These icons
change as these elements update from changes on the projector. The current time
also displays.
Figure 3-2 Quick Launch Intelligent Lens System
Menu Button, on page 3-7 and Table 3.4. The bottom
Section 3: Operation
3-5