Christie Solaria CP2220 User Manual page 133

Channel Setup: 3D Control Settings for 3D Configurations
1
Figure 3-70 Channel Setup: 3D Control Settings for 3D Flat 1998 x 1080
Table 3.45 Channel Setup: 3D Control Settings for all 3D Configurations
Feature
1: Channel Name
2: 3D Sync Input
Mode
3: L/R Display
Reference
4: Frame Rate
N:M
5: L/R Display
Sequence*
6: 3D Sync
Polarity
7: Dark Time **
8: Output Delay
9: Phase Delay
*
L/R Display Sequence is CRITICAL and is used specifically for 3D presentations. Wrong settings on this parameter will lose the 3D
** Dark Time, Output Delay, and Phase Delay values differ based on the 3D hardware system
effect.
implemented.
L/R Display Sequence - This setting tells the projector how to find the left and right eye frames.
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)
2
3
4
5
3D Flat 3D Scope
1998x1080 2048x858
3D Flat 1998x1080 3D Scope 2048x858
Use 'Line Interleave' Use 'Line Interleave'
Not Used Not Used
6:2 6:2
Left (L1R1 L2R2) Left (L1R1 L2R2)
True True
430 microseconds 430 microseconds
-120 microseconds -120 microseconds
0 degrees 0 degrees
6
7
8
9
Section 3: Operation
3-89