Channel Setup: 3D Control Window - Christie Solaria CP2220 User Manual

Channel Setup: 3D Control Window

This window provides numerous controls for adjusting and synchronizing incoming 3D signals (often dual L/R
HD-SDI signals at the SMPTE 292 A and 292 B ports with each other and with external 3D equipment such as
screens, emitters and glasses.) For more details on setting 3D configurations, see
3-83.
Table 3.14 Channel Setup: 3D Control Window
Region
3D Input
Control
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)
1
3
4
5
6
Figure 3-17 Channel Setup: 3D Control Window
Control Description
1: Enable 3D
Select to enable 3D.
2: 3D Test Click the 3D Test Patterns button to display a dialog containing all 3D test patterns.
Patterns
3: 3D Sync
Specify whether a specific frame of input data has left eye or right eye data. This
option would typically be applicable for 3D that does not require Frame Rate N:M.
Input Mode
See 3D Sync Input Mode below.
4: L/R Display
Specify which frame of eye data is to be displayed during a specific display frame.
This signal is referenced to the display frame rate which is specified by the Frame Rate
Reference
N:M.
5: Frame Rate
Sets how many frames to display per number of frames that form one complete image.
Increase the display frame rate to reduce flicker from your source(s). See Frame Rate
N:M
N:M Notes below.
3.8 Working with 3D, on page
2
7
8
9
10
Section 3: Operation
3-25