Section 3: Operation
3.5.4 Diagnostics Window
Required permission level - Operator (except DLP Management), Administrator or Service.
Diagnostics: Interrogator Window
The Diagnostics: Interrogator window captures the current state of the system that can assist in the
diagnostics of projector components. It retrieves all of system logs and current configuration information and
compresses it into a single file. Interrogator can run in two modes:
• Basic Mode which enables the collection of log files only
• Enhanced Mode which creates log files plus registered batch files.
Table 3.7 Diagnostics: Interrogator Window
Control
Basic Mode
Enhanced Mode
Download to
USB
NOTE: Log files are compressed into a .7z or 7-zip file format. A tool for opening these archives can be
downloaded from http://www.7-zip.org.
3-16
Figure 3-8 Diagnostics: Interrogator Window
Description
Executes the interrogator in basic mode and generates a zip file (.7z or 7-zip file format)
of the results.
Executes the interrogator in enhanced mode and generates a zip file (.7z or 7-zip file
format) of the results.
Copies the interrogator file to a USB drive which is connected to 1 of the USB ports on
the TPC. This is the only way to access the interrogator results.
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)