Christie Solaria CP2220 User Manual page 107

Upgrade: Package Details Window
Table 3.36 Upgrade: Package Details Window
Control
Grid View
Upgrade
Different
Components
Only
ICP Only Force
Install
Force Upgrade
All
Factory Install
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)
Figure 3-49 Upgrade: Package Details Window
Description
Displays the available components in the upgrade package. This grid also displays the currently
installed version along with the new version found in the upgrade package. If the current version and
new version do not match, the row will be bold to indicate what will be upgraded.
This selection instructs the upgrade system to only upgrade components that are newer or older than
the currently installed version. This is the default and recommended upgrade method.
This selection instructs the upgrade system to force an ICP only install regardless of what current ver-
sion is installed.
This selection instructs the upgrade system to upgrade all components found in the upgrade package.
Components with the same version will also be upgraded.
This selection instructs the upgrade system to clear all configurations and upgrade all components on
the system. This is equivalent to the projector when it's released from the factory.
Section 3: Operation
3-63