Section 3: Operation
WHITE TOLERANCE NOTES
If desired, define new tolerance coordinates for the current TCGD to increase or decrease this tolerance area or
to change its shape or location. Larger boxes relax the tolerance reducing the loss of light caused by precise
matching. If the projector's whites must precisely match the target white point defined for the current TCGD
(typical for telecine use), ensure the White Tolerance check box is clear. If this match can be anywhere
within the tolerance box (typical for theatre use), click the White Tolerance check box.
The White Tolerance check box status is saved with the TCGD. Keep in mind that some light is usually
discarded for an exact match, resulting in a dimmer image. It is recommended that you enable the tolerance
box for all applications requiring maximum brightness, such as in theatres. Do not enable the White
Tolerance check box if exact color performance is more crucial than overall image brightness, such as in
telecine applications.
3.5.8 Administrator Setup Window
Required permission level - Administrator (except Marriage) or Service.
Administrator Setup: Preferred Channel Setup Window
The Preferred Channel Setup window enables the management and organization of all available channels.
There are 64 pre-defined channels in total where nine channels display directly on the Main panel of the TPC.
This window allows you to select and organize these nine channels.
1
Figure 3-35 Administrator Setup: Preferred Channel Setup Window
3-46
2
3
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)