Christie Solaria CP2220 User Manual page 48

Section 3: Operation
Control
2: Channels Buttons
3: All Channels Button
4: Power
Power OFF
5: Lamp
Lamp OFF
6: Douser
Douser Closed
7: Aux Lens
Aux Lens OUT
8: Lens Adjust
9: Test Patterns
Disable
3-4
Description
Nine of the most commonly used channels display on the Main panel for easy
access. Select these channels in the Administrator Setup: Preferred Channel
Setup window. To start a feature or presentation, click the corresponding display
Channel button to activate the channel. NOTE: Clicking a Channel button auto-
matically turns Test Patterns OFF to present show content.
Click to choose a channel from all 64 channels.
Turn the projector ON or OFF. This changes the projector from stand-by to full
power. The Power ON/OFF buttons require a hold-down period of a 1/4 sec-
Power ON
ond to prevent accidental activation. A message displays in the title bar indicat-
ing when the projector is powering ON/OFF.
Turn the lamp ON or OFF. The Lamp ON/OFF buttons require a hold-down
period of a 1/4 second to prevent accidental activation. If the Lamp ON button
Lamp ON
is selected before the Power ON button, a boot delay occurs for the projector to
power ON and turn the lamp ON.
Close or open the douser.
Douser Opened
(Optional) Engage or disengage the auxiliary lens. To widen images for scope
cinema display, engage the auxiliary lens on the projector. If the auxiliary lens
Aux Lens IN
mount is not installed, the Aux Lens buttons are disabled (greyed).
(Optional) Controls for the Intelligent Lens System (ILS) which are lens motors
that automate the process of optimizing the projected image. Click to open the
ILS Adjust window. See Lens Adjust Notes below. If the Intelligent Lens Sys-
tem is not installed, the Lens Adjust button is not visible.
Select or disable test patterns. Clicking the Select Test Pattern button
launches the Preferred Test Pattern Setup window for you to choose a test pat-
Select Test Pattern
tern to display.
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)