Connecting Sources - Christie DS+5K User Manual

Section 2: Installation and Setup
2.3 Connecting
Sources
RGB Signals
2-12
Sources connect to the Input Panel located at the back of the projector. See Figure 2.7.
The upper right corner (
analog RGB source, or it can also be used for YPbPr signals or additional video
sources. Just beside these BNCs, the DVI-I connector (
analog display signals from a computer. Connect analog composite video at
INPUT 4
or S-video at
There are also several optional interfaces available for connecting other sources—
these interfaces slide into the remaining unused option slot, and can be done while the
projector is running.
NOTES: 1) See Section 6, Specifications for details regarding compatible inputs. 2)
Use high quality shielded cables only for all connections.
'
INPUT 1
consists of 5 BNCs (connectors) for linking to a variety of sources. The
typical connection would be to an RGB source such as a PC, Mac, DEC, Sun, SGI and
others. This projector supports multiple sync types with RGB signals: sync-on-green,
composite sync, and separate H & V syncs.
NOTE: Depending on your source, you may need a custom adapter cable with BNC
connectors at the projector end and a different type of connector at the other (such as
a 15-pin "D" connector for some computer sources). Contact your dealer for details.
SYNC
Connect the BNC input(s) first. Then connect the red, green and blue source
RED
outputs to the ,
sync-on-green, only the red, green, and blue connections are required. If the source
provides a composite sync output, connect it to the
the source provides separate horizontal and vertical sync outputs, connect horizontal
SYNC
sync to the input labeled
VERT.
labeled See Figure 2.8.
INPUT 1
) typically accepts an RGB signal from an external
from devices such as VCRs, laser disc players or DVD players.
Figure 2.7. Input Panel
GREEN BLUE
, and BNCs on the
HOR/COMP
and connect vertical sync to
User's Manual
INPUT 2
) accepts digital or
INPUT 1
panel. If the source uses
SYNC HOR/COMP
input labeled
SYNC
INPUT 3
. If
input