Main Specifications - GRAPHTEC FC7000 Series User Manual

11-2

11.1 Main Specifications

CPU
Configuration
Drive
Max. Cut Area (expanded
mode)
Guaranteed precision cutting
*1
area
Mountable media width
Max. cutting speed (Axial)
Specifiable speeds
Cutting Pressure
Min. character size
Mechanical resolution
Programmable resolution
*1
Repeatable accuracy
Number of cutters/pens
Pen types
Pouncing tool type
Compatible media
Compatible paper for pouncing
Standard interfaces
Buffer memory
Resident command sets
LCD Panel
Power supply
Power consumption
Operating environment
Guaranteed accuracy
environment
External dimensions without
stand
Weight
*1
When the optional basket and Graphtec-specified media are used.
*2
HP-GL is a registered trademark of Hewlett-Packard Company.
*3
The 2-pen unit is a factory-installed option. It cannot be retrofitted.
*4
The PPA32-TP12 pouncing pen cannot be used.
*5
The CB15UA cutter blade and a reinforced backing sheet must be used when cutting high-intensity
reflective film.
S p e c i f i c at i o n s : M a i n S p e ci f i ca t i o n s
FC7000-75 FC7000-100
32-Bit
Grit-rolling plotter
Digital servo
50m x 762 mm 50m x 1067 mm
(Expanded mode) (Expanded mode)
10m x 742 mm 10m x 1047 mm
Max. 920 mm, Min. 50 Max. 1224 mm, Min.
mm 50 mm
148.5cm/sec (45 ips)
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80, 90, 100, 105 cm/sec
48 steps, 0.196-5.88N (20-600gf)
3mm (0.125 in.) alphanumeric Helvetica med. Font
0.005mm
GP-GL: 0.01/0.05/0.025/0.01mm, HP-GL: 0.025mm
Max. 0.1 mm/in unit of 2 m (excluding media shrinkage)
1 (2 for the optional 2-pen models)
Water-based fiber-tip, oil-based ballpoint, ceramic, and disposable ink pens
Pouncing tool: PPA33-TP12, 1.2-mm pin diameter)
Mono-vinyl chloride media, fluorescent media, and media for illuminated displays, high reflec-
tive media, up to 0.25mm thick, Sandblast rubber up to 1mm thick
Regular paper from 0.06 to 0.13 mm thick
RS-232C/USB (Auto switching)
2 MB
GP-GL/HP-GL(Control panel switching)
LCD 20x4 - Supports 7 languages: with amber backlight
100-240VAC/50-60 Hz (Auto switching)
140VA max.
Temperature: +10º C to +35º C
Humidity: 35% to 75% (non-condensing)
Temperature: +16º C to +32º C
Humidity: 35% to 70%(non-condensing)
1260 x 402 x 477mm 1560 x1210 x 715mm
29 kg 43 kg
(including stand)
FC7000-130
50m x 1372 mm
(Expanded mode)
10m x 1352 mm
Max. 1529 mm, Min.
50 mm
*2
*3
*4
1860 x 1210 x 715mm 2120 x 1210 x 715mm
51 kg
(including stand)
FC7000-160
50m x 1626 mm
(Expanded mode)
10m x 1606 mm
Max. 1834 mm, Min.
50 mm
*5
59 kg
(including stand)