Cutter Pen Nomenclature - GRAPHTEC FC7000 Series User Manual

2.2 Cutter Pen Nomenclature

The plotter cuts using a cutter blade mounted in a cutter-pen plunger. There are
two different cutter-pen plunger s to suit the diameter of the cutter blade to be
mounted (the 0.9-mm cutter-pen plunger is provided as a standard accessory). Be
sure to mount the cutter blade in the corresponding cutter-pen plunger.
WARNING: To avoid bodily injury, handle cutter blades with care.
Cutter blade Plunger
Plunger cap
C u t t e r B l a d e s a n d C u t t er P e n s : C u t t er P e n No m en cl at u re
Blade-length adjustment knob
(Blue: For 0.9-mm-diameter blades)
(Red: For 1.5-mm-diameter blades)
2 - 3