Table of Contents
Advertisement
Safety Precautions (Continued)
If the plotter generates smoke, overheats, emits a strange
odor, or otherwise functions abnormally, do not continue
using it. Turn off the power and unplug the power cord from
the electrical socket.
• Use of the plotter in such a condition may result in a fire hazard or
electric shock.
• After confirming that smoke is no longer being emitted, contact your
sales representative or nearest Graphtec vendor for repairs.
• Never attempt to perform repairs yourself. Repair work by inexperi-
enced personnel is extremely dangerous.
Do not allow dust or metal scraps to adhere to the power
plug.
• A dirty power plug may result in electric shock or a fire hazard due to
current leakage.
Do not use the power cord if it is damaged.
• Use of a damaged cord may result in electric shock or a fire hazard
due to current leakage.
• Replace the power cord with a new one.
Be careful when handling the cutter blade.
• Touching the blade with your bare hand may cause injury.
• Do not touch the cutter blade while cutting is in progress.
WARNING
Prohibited
Prohibited
Beware of electric shock
Unplug the power
cord from the socket
Do not touch
ix
Advertisement
Table of Contents
