Table of Contents
Advertisement
6-32
7
8
9
10 Press the NEXT key to return the plotter to Ready status.
A DV A N C E D F U N C T I O NS AN D O P E R AT I O NS : S e t ti n g th e D I S T A N C E A DJ U S T M E NT
If the F4 key (STANDARD) was selected, the distance between the registration
marks is rounded up or down to the nearest 5 mm, 10 mm, or 50 mm.
Press the ENTER key to register your setting.
If CUSTOM was selected for DISTANCE ADJUST, the following screen is
displayed for selecting the distance adjustment divisor value.
DISTANCE ADJUST
When LENGTH UNIT is set to INCH:
DISTANCE ADJUST
0.25inch
To select the 5 mm distance adjustment divisor value (distances are
automatically rounded up or down to the nearest 5 mm), press the F2 key (5
mm RESOLUTION).
To select the 10 mm distance adjustment divisor value (distances are
automatically rounded up or down to the nearest 10 mm), press the F3 key (10
mm RESOLUTION).
To select the 50 mm distance adjustment divisor value (distances are
automatically rounded up or down to the nearest 50 mm), press the F4 key (50
mm RESOLUTION).
For INCH settings, select 0.25, 0.5, 0.75, 1, or 1.5 inches using the Up and
Down cursor keys.
Press the ENTER key to register your setting.
This setting is retained in the plotter's internal memory even when the power is
turned off.
5mm RESOLUTION*
10mm RESOLUTION
50mm RESOLUTION
RESOLUTION*
Advertisement
Table of Contents
