Chapter 6: ADVANCED
FUNCTIONS AND OPERATIONS
This chapter describes the FC7000's advanced functions
and operations.
Topics in this chapter
6.1 Changing the Initial Feed Speed
6.2 Setting AUTO PRE FEED
6.3 Setting the ORIGIN in HP-GL
6.4 Setting the Cutting/Plotting Area
6.5 Expanding the Cutting/Plotting Area
6.6 Setting the PAGE LENGTH
6.7 Rotating the Coordinate Axes
6.8 Setting the Mirror Mode
6.9 Enlarging or Reducing an Image
6.10 Data Sorting Settings
6.11 Auto Registration Mark Reading Function
6.12 Setting the Registration Mark Mode
6.13 Setting the Registration Mark Reading Area
6.14 Selecting the Registration MARK TYPE
6.15 Specifying the Registration MARK SIZE
6.16 Setting the DISTANCE ADJUSTMENT
6.17 Setting the AXIS ORIGIN OFFSET
6.18 Setting the PAPER-WEIGHT Function
6.19 Setting the SENSOR OFFSET ADJUSTMENT
(Method 1)
6.20 Setting the AXIS OFFSET ADJUSTMENT
(Method 2)
6.22 Selecting the Axis Alignment Tool
6.23 AXIS ALIGNMENT Settings
6.24 Setting Tangential Emulation
6.25 Setting the PEN UP SPEED
6.26 Adjusting the Blade OFFSET ANGLE
6.27 Setting the OFFSET FORCE
6.28 Setting the STEP PASS
6.29 Setting the INTIAL DOWN FORCE
6.30 Setting the DISTANCE ADJUST Function
6.31 Selecting the Type of Perforated Line
Mode