Aligning The Pinch Rollers; Standby Position - GRAPHTEC FC7000 Series User Manual

3.6 Aligning the Pinch Rollers

Position the left- and right pinch rollers to correspond with the width of the media.
Adjust the pinch rollers so that they are positioned above both the media and the
grit rollers. Position the pinch rollers within the grit roller potition stickers ensures
that they are above the grit rollers.
Grid roller potition sticker
CAUTION: To move the pinch rollers, the media set lever must be in the lowered position.

Standby Position

With the FC7000-100/130/160 models, the number of pinch rollers required to hold
down the media varies according to the width of the loaded media. Be sure to
move a pinch roller that is not used to the standby position so that it does not
affect the cutting or plotting operation.
Standby position
P re p ar i n g t o C u t: A l i g n i n g t h e P i n c h R o l l e rs
NG
OK
3 - 13
NG
OK