Table of Contents
Advertisement
x
Safety Precautions (Continued)
Do not use or store the plotter in a location exposed to direct
sunlight or the direct draft of an air conditioner or heater.
• Such locations may impair the performance of the plotter.
Do not use the plotter in an excessively dusty or humid
location.
• Such locations may impair the performance of the plotter.
Do not place any receptacle containing water or other fluid on
top of the plotter.
• Fluid falling inside the plotter may cause electric shock or a fire haz-
ard due to current leakage.
Do not use the plotter in a location subject to excessive
mechanical vibration or electrical noise.
• Use in such locations may impair the performance of the plotter.
When disconnecting the power cord or interface cable, do not
pull on the cord/cable.
• Such action will damage the cord/cable, resulting in a fire hazard or
electric shock.
If water or foreign matter enters the plotter, discontinue use.
Turn off the power and unplug the power cord from the
electrical socket.
• Use of the plotter in such a condition may result in electric shock or a
fire hazard due to current leakage.
• Contact your sales representative or nearest Graphtec vendor for
repairs.
CAUTION
Prohibited
Prohibited
Avoid water
Beware of electric shock
Prohibited
Prohibited
Unplug the power
cord from the socket
Advertisement
Table of Contents
