Attaching The Fc7000 Basket (Option) - GRAPHTEC FC7000 Series User Manual

1 - 10

1.4 Attaching the FC7000 Basket (Option)

The FC7000 Basket box contains one basket holder assembly (one front basket
tube and one rear basket tube inserted into two tube brackets), one cloth basket,
and a screw/wrench set.
1
2
O u t o f t h e B o x : A t ta c h i n g t h e F C 70 0 0 B as k et ( O p t i o n )
Attach one of the two tube brackets on the basket holder assembly to the left
side of the stand with two socket head cap screws, using the Allen wrench.
Repeat this step with the other side.
Basket holder assembly
Drape the middle section of the cloth basket over the stand's center bar, and
then snap the middle section of the cloth basket around the center bar. Snap
the front edge of the cloth basket around the front basket tube, and then snap
the rear edge of the cloth basket around the rear basket tube.
Holder snap
Cloth basket
Socket head
cap screw
Front
Cloth basket
Socket head
cap screw
Stand
Side view
Center bar
Separate into front and rear baskets,
with the center bar as the center point