6.9 Enlarging or Reducing an Image
This function sets the SCALE factor for enlarging or reducing an image to be cut or
plotted.
1
2
3
4
5
6
7
A D V A N CE D F U NC T I O N S A N D O P E RA T I O N S : E n l a rg i n g o r R ed u c i n g a n I ma g e
S
P
ETTING
ROCEDURE
Press the MENU key.
Press the NEXT key until the following menu appears.
Press the F3 key (FUNCTION 1). The following menu appears.
Press the F4 key (SCALE). The following menu appears.
Use the (
) POSITION keys to select the desired scale factor within the
range of 1/8, 1/4, 1/2, 1, 2, 3, 4, 5, 6, 7, and 8.
Press the ENTER key to register your setting.
Press the MENU key to return the plotter to Ready status.
This setting is retained in the plotter's internal memory even when the power is
turned off.
INTERFACE>
AREA PARAMETERS>
FUNCTION 1>
FUNCTION 2>
PREF. LINE TYPE>
ROTATE>
MIRROR>
SCALE>
SCALE
SCALE FACTOR =
1
6-15