Main Unit Field Service
2.4.22
C013: MAC address error (Only for magicolor 5450)
C015: BOOT ROM error (Only for magicolor 5450)
C022: NVRAM error (Only for magicolor 5450)
Print Control Board (PWB-P)
Step
Turn OFF the Power Switch of the printer and
1
turn it ON again (Restart of the printer.)
Check the PWB-P connector for proper connec-
2
tion and correct as necessary.
3
Change PWB-P.
2.4.23
C025, C026, C027: Controller ROM error (Only for magicolor 5450)
Print Control Board (PWB-P)
Step
Turn OFF the Power Switch of the printer and
1
turn it ON again (Restart of the printer.)
Check the PWB-P connector for proper connec-
2
tion and correct as necessary.
If this error message is displayed after update of
3
firmware, conduct the firmware update proce-
dures again.
4
Change PWB-P.
Relevant Electrical Parts
Action
Relevant Electrical Parts
Action
4-23
Malfunction code
WIRING DIAGRAM
Location
Control Signal
(Electrical
Component)
-
-
-
WIRING DIAGRAM
Location
Control Signal
(Electrical
Component)
-
-
-
-
-
-
-
-
-
-
-