Initialization; Foolscap Size; No Sleep - Konica Minolta bizhub C250P Service Manual

16. TECH. REP. MODE
16.3.9

Initialization

A. Data Clear
Functions • To initialize the setting data.
Use • To clears the setting data.
NOTE
• When removing or installing the hard disk after registering the data below, be
sure to clear the data.
Referring data: User Authentication/Account Track.
Setting/ 1. Select the Data clear.
Procedure 2. Press the Menu/Select key.
3. When "OK" is displayed, turn the main power switch OFF, and ON again.
B. System ERR Clear
Functions • To reset the trouble data.
Use • Use to clear the "Jam", "Trouble", "Error" displays, and other improper displays.
Setting/ 1. Select the System ERR Clear.
Procedure 2. Press the Menu/Select key.
3. When "OK" is displayed, turn the main power switch OFF, and ON again.
16.3.10

Foolscap Size

Functions • To set the size for Foolscap paper.
Use • Upon setup.
• To change the size for Foolscap paper.
Setting/ • Select the size from among the following five.
Procedure
220 × 330 mm
16.3.11

No Sleep

Functions • To display the option of "OFF" for the Sleep Mode Setting screen available from
Administrator Setting.
Use • To display the option of "OFF" for the Sleep Mode Setting.
Setting/ • The default setting is Prohibit.
Procedure
188
8 1/2 × 13 "8 1/4 × 13"
Permit
Field Service Ver. 2.0 Mar. 2006
8 1/8 × 13 1/4 8 × 13
"Prohibit"