Settings In The List Output; Protocol Trace; Settings In The Fax Settings; Self-Telephone - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 1.0 Jun. 2008
7.4

Settings in the List Output

7.4.1

Protocol Trace

Functions
• To produce an output of a protocol information during fax transmission.
Use
1. Call the Service Mode on the screen.
Setting/
2. Touch [List Output] → [Protocol Trace].
Procedure
3. Press the start key to print the report.
7.5

Settings in the FAX Settings

7.5.1

Self-Telephone #

• It is displayed only when bit2 for the mode 043 is set to "1" by the following setting:
[Service Mode] → [System] → [Software Switch Setting].
Functions
• To register the telephone number of the local fax machine.
Use
1. Touch [Self-Telephone #].
Setting/
2. Select the key for the self-telephone # to be regist.
Procedure
3. Enter the self-telephone # from the 10-key pad, and touch [OK].
7. Service Mode
25