Basic Call Features - Matrix SPARSH VP110 Quick Start Manual

Account Settings:
Press the Menu soft key when the phone is idle, select Settings->Advanced Settings (default password: admin)->
Accounts to configure the account.
Note: For more information on account parameters, refer to

Basic Call Features

Placing a Call
Using the handset:
1. Pick up the handset.
2. Enter the number, and then press the Send soft key.
Using the speakerphone:
1. With the handset on-hook, press
2. Enter the number, and then press the Send soft key.
Using the headset:
1. With the headset connected, press
2. Enter the number, and then press the Send soft key.
Note: During a call, you can alternate between the headset, hands-free speakerphone and handset modes by
pressing the Headset
connected headset.
Answering a Call
Using the handset:
Pick up the handset.
Using the speakerphone:
Press .
Using the headset:
Press .
Note: You can reject an incoming call by pressing the
Ending a Call
Using the handset:
Hang up the handset or press the EndCall soft key.
Using the speakerphone:
Press or the EndCall soft key.
Using the headset:
Press the EndCall soft key.
Redial
Press to enter the Placed Calls list, press
the Send soft key.
Press twice when the phone is idle to dial out the last dialed number.
.
to activate the headset mode.
key, the Speakerphone key or by picking up the handset. Headset mode requires a
Configuring via web user interface
Reject soft key.
or to select the desired entry, and then press
.
or
4