Adjusting Supports - Otto Bock Xeno Service Manual

3. Slide the armrest forward or backward along the attachment rail to the desired position.
Properly reassemble all components upon completion of the work.
Figure 56 Changing the armrest position

6.9.6 Adjusting supports

The height of the lateral and thoracic supports can be adjusted.
Changing the Position of the Support on the Seat
Tools:
❒ 2 x Allen wrench size 5
Steps:
1. Loosen and remove the two nuts if necessary, using the Allen wrench to hold the Allen head
screws stationary on the inside.
2. Slide the support receiver forward or backward along the slotted hole.
Properly reassemble all components upon completion of the work.
Figure 57 Changing the position of the seat supports
56