Otto Bock Xeno Service Manual page 51

Figure 50 Adjusting the Back Compensation
1 Mounting sheet
2 Allen head screw
3 Horizontal socket
Setting the Electric Back Angle Adjustment Actuator
Preparation:
❒ Move the seat into the standing position until the screws are freely accessible.
❒ Fold the backrest down (see Section 3.3).
Tools:
❒ Allen wrench, size 5 mm
Steps:
1. Pull the cotter pin and remove the actuator from the collar bushing (see Fig. 53, Item 6).
3
1
2
51