Installing Joystick Accessories - Otto Bock Xeno Service Manual

Tools:
❒ Allen wrench, size 6 mm
Steps:
1. Hold the bracket for the attendant controls against the back tube.
2. Attach with two Allen head screws.
Figure 82 Attaching holder for attendant control
3. Insert the tube with the attendant controls
4. Connect the attendant controls to the controller.

6.15.5 Installing joystick accessories

Tools:
❒ Allen wrench, size 6 mm
Steps:
1. Slide off the top of the joystick.
2. Slide an accessory such as the fork for tetraplegics, golf ball, stick etc. onto the metal pin.
3. Mount the accessory by tightening the set screw.
Figure 83 Installing joystick accessories
75