Otto Bock Avantgarde CV Instructions For Use Manual
Avantgarde cv / cs / clt
Hide thumbs
Also See for Avantgarde CV:
- Service manual (56 pages) ,
- Instructions for use manual (36 pages) ,
- Service manual (64 pages)
Related Manuals for Otto Bock Avantgarde CV
Summary of Contents for Otto Bock Avantgarde CV
- Page 1 Avantgarde CV / CS / CLT Instructions for Use (User) ..........© Otto Bock · 647G689=EN-01-1012...
- Page 2 12/2010...
-
Page 3: Table Of Contents
Table of contents Table of contents Product description ..............................Foreword ..............................Function ..............................Product overview ............................Safety ..................................Explanation of warning symbols ......................... General safety instructions ......................... Safety instructions for use .......................... Type plate and warning signs ........................Delivery ................................. Scope of supply ............................ - Page 4 Table of contents Maintenance / repair ............................Maintenance .............................. 6.1.1 Maintenance intervals ........................6.1.2 Scopes of maintenance ........................Repair ................................ 6.2.1 Inner tube/rim tape/tyre replacement ....................Disposal ................................Disposal information ..........................Legal information ..............................Period of use ............................. Liability ............................... CE Conformity ............................
-
Page 5: Product Description
Should you have any question or if a problem cannot be solved even using the instructions for use, please contact the specialist who delivered the wheelchair to you, or the Otto Bock after-sales service (addresses, see inside rear cover or rear cover). -
Page 6: Product Overview
Product description 1.3 Product overview Avantgarde CS Maximum load (in combination with double cross-brace): 140 kg Thanks to its closed frame geometry, the Avantgarde CS allows very rigid and sporting use. 1 Seat/seat cover 9 Rear wheel with push ring 2 Side panel 10 Wheel shaft release button 3 Backrest/backrest cover... - Page 7 Maximum load (in combination with double cross-brace): 140 kg Thanks to its frame geometry, the Avantgarde CV offers precise leg guidance with the possibility of folding away and removing the footrests. When the footrests are removed, the upright frame front section allows the wheelchair to be manoeuvred close to objects.
-
Page 8: Safety
Safety Avantgarde CLT Maximum load (in combination with double cross-brace): 100 kg The Avantgarde CLT is the weight-optimised sports version for particularly active users. In the version CLT "welded", subsequent modification of the wheel position and backrest height was sacrificed in favour of saving additional weight. 1 Seat/seat cover 9 Rear wheel with push ring 2 Side panel... -
Page 9: General Safety Instructions
Safety 2.2 General safety instructions INFORMATION Read the instructions for use before using the product. Familiarise yourself with the handling, functions and use of the product before using it. You may compromise your safety if you fail to observe these instructions. 2.3 Safety instructions for use Hazards during preparation for use WARNING... - Page 10 Safety Danger when getting into the wheelchair CAUTION Getting into the wheelchair with the footrests folded down Risk of falling, tipping of the user ► Fold the footrests/footplate up before getting into the wheelchair. ► Always get into the wheelchair from the side, if possible. Risk of hand injuries CAUTION Pinching in exposed drive parts...
- Page 11 Safety CAUTION Risky use of the wheelchair Risk of tipping or rolling over, or of collisions with others ► Travel slowly over obstacles (e.g. steps, curbstones) and on upward or downward slopes and inclines. ► Do not "jump" down from curbstones or higher surfaces. CAUTION Wrong use of the wheel lock Risk of falling with abrupt braking or rolling away of the wheelchair...
- Page 12 Safety WARNING Anti-tipper not activated Risk of falling, tipping to the rear ► Ensure that an installed anti-tipper is activated before travelling over obstacles and on inclines. ► The anti-tipper must engage audibly before use. Proper engagement must be checked by the user or an accom panying person.
-
Page 13: Type Plate And Warning Signs
Safety Hazards from incorrect use of the wheelchair NOTICE Use in wrong ambient conditions Risk of damage to the product ► Do not use the wheelchair in salty water ► Also avoid – if possible – sand or other dirt particles that may damage the wheel bearings. NOTICE Overloading Risk of damage to the product... -
Page 14: Delivery
The standard equipment includes: • Aluminium frame with double cross-brace • Avantgarde CS/CLT: Closed front frame with integrated footrest holder • Avantgarde CV: Vertical front frame with pivoting footrest holder • Footrests/side panels of aluminium • Calf band • Seat cover, nylon, retensionable •... - Page 15 Preparation for use CAUTION Failure to check that the wheelchair is ready for use Risk of falling, tipping of the user ► Before using the wheelchair for the first time, check the pre-settings with the support of the qualified personnel. ►...
-
Page 16: Operation
Operation 5 Operation 5.1 Techniques for Using a Wheelchair INFORMATION Be sure to read also the safety instructions in chapter 2.3 before using the wheelchair for the first time. Information and practical tips on fundamental techniques for using the wheelchair can be found in the brochure "Tech niques for Using a Wheelchair"... -
Page 17: Information On Use
Operation 1) Manoeuvre the wheelchairs so that they are positioned at an angle of approx. 45° degrees to each other (see Fig. 9). Ensure that the brakes do not become entangled. 2) Lock the brakes of the wheelchair currently in use. 3) On the other wheelchair, lock the brakes and fold up the footrest (footplate) (see Fig. -
Page 18: Folding Away/Removing The Footrest (Model Cv Only)
Operation 5.3.1.3 Folding away/removing the footrest (model CV only) 1) Open the calf band. 2) Push the swivel handle of the footrest to the rear (see Fig. 14). 3) Swing the footrest outwards and to the side by 90° (see Fig. 15). 4) If necessary, pull off the footrest from above (see Fig. -
Page 19: Adjusting The Angle Of The Hinged Footrest
Operation 5.3.1.5 Adjusting the angle of the hinged footrest 1) Press the red knob of the footrest (see Fig. 20). 2) Adjust the angle and allow the footrest to engage. 5.3.1.6 Adjusting the angle of the amputation leg rest 1) Release the clamping lever (see Fig. 21). 2) Turn the leg rest to the desired angle. -
Page 20: Side Panels
Operation 5.3.3 Side panels CAUTION Pinching at the side panels Risk of pinching and crushing of the hands ► Pay attention not to pinch parts of your body between the side or frame parts. 5.3.3.1 Adjusting the armrest height on desk side panels The armrest can be adjusted in height by moving it to various positions without the use of tools. -
Page 21: Push Handles
Operation Fitting/closing 1) Turn the desk side panel towards the backrest and insert into the side panel mounting (see Fig. 25). 2) Turn the desk side panel parallel to the wheelchair seat and fold down. 3) Ensure that the desk side panel engages audibly in the mounting on the frame tube. 5.3.4 Push handles 5.3.4.1 Adjusting the push handles The height of the push handles of the wheelchair (height-adjustable push handles: see Fig. -
Page 22: Brakes
Operation 5.3.6 Brakes 5.3.6.1 Use of the knee lever brake CAUTION Incorrect use of the knee lever brake Risk of falling with abrupt braking or rolling away of the wheelchair, crushing of the hands ► Do not use the knee lever brake when travelling ►... -
Page 23: Use Of The Drum Brake
Operation 5.3.6.2 Use of the drum brake The drum brakes allow the attendant to comfortably and safely brake the wheelchair by actuating the brake lever: 1) Pull the brake lever (see Fig. 34, item 1). 2) If necessary, secure the brake lever by additionally actuating the red locking slide. The wheelchair remains securely braked (see Fig. -
Page 24: Tip-Assist
Operation 3) Press on the anti-tipper from above until it disengages (see Fig. 37). 4) Push in the anti-tipper by 180°. → The anti-tipper is deactivated. 5.3.8 Tip-assist 1) At an obstacle, please one foot on the tip -ssist (see Fig. 38) and press down. 2) The wheelchair can then be easily tipped by pressing down on the push handles at the same time. -
Page 25: Dismantling / Transport
The wheelchair must be prepared for transport in a car. 1) Fold up the footrests. INFORMATION On the Avantgarde CV model, the footrests can be removed, thus further reducing the packing size (see page ). 2) Remove the seat cushion. -
Page 26: Use In A Vehicle For The Disabled
► The Avantgarde CV/CS wheelchair may be used in a vehicle for the disabled, subject to the use of the safety ele ments offered by Otto Bock and suitable restraint systems. For more information, please refer to our brochure "Using your wheelchair / mobility base with seating shell or buggy for transportation in motor vehicles for the dis... -
Page 27: Disinfection
(Scopes of maintenance). • We also recommend that you have the wheelchair serviced every 12 months by your authorised Otto Bock dealer. • If faults are discovered, in particular in the event of instability of the wheelchair or a change in its operating beha... -
Page 28: Repair
Maintenance / repair • If the wheelchair becomes wet, it should be rubbed dry again as quickly as possible. • Bolted connections should be periodically checked for tightness, especially during the initial period of use or after making adjustments to the wheelchair. If the bolted connection comes loose several time, inform your dealer imme diately. -
Page 29: Disposal
If the end of the useful life is reached, the user or a responsible accompanying person should contact the qualified per sonnel who supplied the wheelchair or the Otto Bock after-sales service (address, see rear inside cover or rear cover). -
Page 30: Warranty Terms
Appendices 8.4 Warranty terms Further information on the warranty terms can be provided by the qualified personnel supplying the wheelchair or by the Otto Bock after-sales service (addresses, see rear inside cover or rear cover). 9 Appendices 9.1 Technical Data Avantgarde CS/CV/CLT –... - Page 31 Tél. +33 1 69188830 · Fax +33 1 69071802 Tel. +91 22 2520 1268 · Fax +91 22 2520 1267 e-mail: information@ottobock.fr · www.ottobock.fr e-mail: information@indiaottobock.com Otto Bock Ortopedi ve Rehabilitasyon Tekniği Ltd. Şti. www.ottobockindia.com Gazi Mahallesi · Silahtar Caddesi No: 106 Otto Bock Italia S.R.L TR–06560 Yenimahalle/Ankara...
- Page 32 Lindenstraße 13 · 07426 Königsee/Germany Hersteller/Manufacturer: Otto Bock Mobility Solutions GmbH Lindenstraße 13 · 07426 Königsee/Germany Phone +49 69 9999 9393 · Fax +49 69 9999 9392 ccc@ottobock.com · www.ottobock.com Otto Bock has a certified Quality Management System in accordance with ISO 13485.