Otto Bock Xeno Service Manual page 72

Tools:
❒ Allen wrench, size 2 mm
Steps:
1. Slide the holder (standard holder; height and/or laterally adjustable holder; swan neck holder)
onto the attachment rail underneath the armrest and attach with two set screws.
Figure 77 Attaching the holder
2. Attach the LCD monitor to the holder with three Allen head screws.
Figure 78 Attaching the LCD monitor to the holder
3. Connect the extension cable.
4. Connect the LCD monitor to the controller.
5. Function test (information on navigating the menu, see Section 5 and instructions for use en-
Able50 (647G490=D/GB).
72