Adjusting The Leg Supports; Adjusting The Lower Leg Length - Otto Bock Motus CV Instructions For Use Manual

46
48

6.7 Adjusting the leg supports

The distance between the footplates and the sitting surface influences sitting stability. The height adjustment acts
on the pelvis and ischial bones.

6.7.1 Adjusting the lower leg length

The required leg support height depends on the lower leg length of the user and the thickness of the seat cushion.
Leg supports/tube foot support on Motus CS
1) Loosen the Allen screw on the front frame (see fig. 50).
2) Adjust the lower leg length as needed (not illustrated). Ensure that the tube foot support is inserted at least
40 mm into the leg support holder.
INFORMATION: A mark on the tube foot support indicates the minimum distance the tube foot sup­
port must be inserted during assembly.
3) Tighten the Allen screw to 7 Nm.
50
Leg supports/tube foot support on Motus CV
1) Loosen the Allen screw on the leg support (see fig. 51).
Motus CV, Motus CS
47
49
Settings
23