Chest Belt - Otto Bock Xeno Service Manual

6.9.10 Chest Belt

Adjusting the Width
The width of the belt is changed by adjusting the length of the left and right belt parts.
Figure 65 Changing the length of the chest belt
Changing the height setting
Tools:
❒ Allen wrench, size 4
❒ Ring wrench or open-end wrench, size 10 mm
Steps:
1. Loosen and remove the two Allen head screws on each side of the back frame.
2. Slide or shift the belt attachment bracket along the slotted holes.
Properly reassemble all components upon completion of the work.
Figure 66 Changing the chest belt height
63