Adjusting The Footplate - Otto Bock Xeno Service Manual

6.9.9 Adjusting the Footplate

INFORMATION
The lower leg length can be adjusted in increments of 20 mm. Move the attachment rail evenly with
both hands so that it does not twist.
Adjusting the Footplate to the Lower Leg Length
Tools:
❒ Allen wrench, size 5 mm
Steps:
1. Loosen and remove the two Allen head screws on the attachment rails.
2. Slide the attachment rail with the footplate up or down along the holding rail/fixing holes
spacer, or remove it entirely.
Properly reassemble all components upon completion of the work.
Figure 63 Adjusting the Footplate to the Lower Leg Length/Removing the Footplate
61