Main Parameters - Otto Bock Xeno Service Manual

8.5.1 Main Parameters

The menu tree is divided into the following three main parameters:
❒ Input devices
❒ System settings
❒ Configuration
Main Menu
Parameters
Input devices Hand control
device settings
Joystick module
Special input
90
Submenu Settings
Basic setting 5 adaptable profiles:
- speed
- reaction
- mode
All drive parameters refer to operation with the hand
control device.
Drive All parameters that affect driving are listed here. More
information on the individual parameters is found in
Table 2.
Entry point When the system is powered up, it starts at the
following point:
- Main menu
- Favourites
- Most recent drive mode
- Drive mode 1
- Drive mode 2
- Drive mode 3
- Drive mode 4
- Drive mode 5
Joystick More information on the individual parameters is found
in Table 3.
Sound & display - Commando beep
- Backlight
- Dimming delay
- Beep frequency
- Horn frequency
Miscellaneous - On/Off switch supervision
- Mode switch supervision
- Mode switch timing
- Mode jack
- Bounce button time
- Menu navigation mode
- Menu timing
Basic setting All parameters are equivalent to those for the hand control
device. The parameters do not refer to the standard hand
Drive
control device, but to the stand-alone joystick.
Joystick
Miscellaneous
Basic setting All parameters are equivalent to those for the hand con-
trol device. The parameters do not refer to the standard
Drive
hand control device, but to input devices such as the
Settings
mini joystick or 1-5 button input (special input device).
Entry point
Miscellaneous