Safety Instructions For The Use Of Tools And Accessories - Otto Bock Xeno Service Manual

NOTICE
Risk of damage caused by failure to comply with the service documentation. Familiarity with the
service instructions and the instructions for use is essential for proper service.
The service and maintenance instructions must be read carefully before commencing work. The
service instructions apply in conjunction with the instructions for use and the spare parts catalogue.
All documents must be used together.
All safety instructions contained in these service instructions and all other applicable documents
must be observed and complied with. They must be available to service and maintenance personnel
at all times.
NOTICE
Risk of damage due to excessive heat or cold. The XENO may only be operated in the temperature
range from -25 °C to +50 °C. It must not be operated at temperatures outside this range.
NOTICE
Risk of damage caused by overload. The maximum load capacity for the XENO power wheelchair
is 136 kg.
INFORMATION
Familiarize yourself with the functions of the product. If you are not familiar with the product, read the
instructions for use prior to inspection. The instructions for use are available from the manufacturer
(see overview of all Otto Bock subsidiaries under "Otto Bock Worldwide"). Additional documentation
can be downloaded from the Otto Bock homepage at www.ottobock.de or www.ottobock.com.

2.3 Safety Instructions for the Use of Tools and Accessories

CAUTION
Risk of health impairment due to the use of incorrect tools. When completing the tasks, only use
tools that are suitable for the conditions at the place of work and for which safety and the protection
of health are assured with proper use.
Verify proper functionality before use. In the use of tools and supplies, also consider the ergonomic
relationships between the place of work, tools and supplies, workplace organisation, workflow and
tasks; this is particularly important in regards to posture during the use of tools and supplies.
CAUTION
Risk of health impairment due to the use of improper work clothing. Ensure legally prescribed
protective work clothing is worn.
CAUTION
Risk of injury during tasks that involve lifting. When repair and maintenance tasks must be completed
under raised parts or equipment, ensure suitable precautions are taken to secure the applicable com-
ponents against falling. Equipment used to raise loads must prevent the load from accidentally shifting
in a dangerous manner, dropping in free fall or being accidentally released.
When using lifting platforms, ensure that the power wheelchair is centred on the platform and no parts
project into the danger area.
7