Lap Belt - Otto Bock Xeno Service Manual

6.9.11 Lap belt

The Xeno power wheelchair can be equipped with an optional lap belt.
Attaching the Lap Belt
Tools:
❒ Allen wrench, size 5 mm
Steps:
1. Place the belt attachment bracket at the attachment points on the seat frame.
2. Attach with Allen head screws.
Figure 67 Attaching the lap belt
Changing the belt length
The belt length can be adjusted on both sides.
1. Position the buckle halves in the middle of the body.
2. The position of the buckle halves can be varied by positioning them at right angles in relation
to the belt; any excess belt length will be held in place by the plastic slide.
Figure 68 Adjusting the lap belt
64