Knee Belt - Otto Bock Xeno Service Manual

6.9.12 Knee Belt

Adjusting the Width
The width of the knee belt is changed by adjusting the length of the two belt parts on the right
and left of the pad.
The position of the receiver for the knee belt cannot be changed.
Figure 69 Adjusting the knee belt
Removing the Attachment Device
Tools:
❒ Allen wrench, size 5 mm
Steps:
1. Remove the seat cushion.
2. Loosen the Allen head screw from the bolt.
3. Remove the belt attachment device and replace if required.
Properly reassemble all components upon completion of the work.
Figure 70 Removing the knee belt attachment device
65