Enable50 Wheelchair Controller - Installation And Programming; Overview - Otto Bock Xeno Service Manual

INFORMATION
The enAble50 instructions for use 647G490=D/GB include a list of error codes "WARNING XXX" and
"ERROR XXX" on the LCD monitor as well as information on corrective actions.
8 enAble50 Wheelchair Controller – Installation and Programming
INFORMATION
The enAble50 instructions for use 647G490=D/GB contain more detailed information about the control
unit and the connection of input devices.

8.1 Overview

The enAble50 control unit is extremely versatile, featuring smooth operation, good responsive-
ness and concise colour displays. Various input devices can be used alternately in order to meet
the needs of users.
Figure 87 Control unit elements
With the enAble50 control unit, the power wheelchair can indicate the causes of error mes-
sages on the display. Error sources in the drive section and in the electric options are indicated
by flashing of the corresponding sections in the display's pictogram or a visual display on the
separate LCD monitor (see Section 7.2).
The handheld programming device can be used to make parameter changes (available
separately).
Light
Actuators
1 2 3 4 5
Light
(Seat module)
81