Chapter 11
[1]
Point to Note at Installation
When installing the laser scanner cover, be sure to put the 4 flat cables
[2] and the 3 harnesses [3] through the hole [1] of the laser scanner
cover in advance.
[3]
[1]
[3]
[2]
11.5.10 Upper Frame Unit
11.5.10.1 Before Removing the Upper Frame Unit
imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Remove the ETB unit.(page 8-30)Reference [Removing the ETB Unit]
2) Remove the fixing assembly.(page 10-8)Reference [Removing the Fix-
ing Assembly]
3) Remove the rear cover unit.(page 11-12)Reference [Removing the Rear
Cover Unit]
4) Remove the ADF Unit + Reader Unit.(page 5-9)Reference [Removing
the ADF Unit + Reader Unit]
5) Remove the left cover.(page 11-14)Reference [Removing the Left Cov-
er]
6) Remove the right cover.(page 11-12)Reference [Removing the Right
Cover]
11.5.10.2 Removing the Upper Frame Unit
imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Remove the harness guide [1] and the CCD Relay PCB [2].
11-20
[2]
F-11-43
[2]
- 4 screws [2]
2) Remove the screw [2] on the backside of the flat cable [1].
3) Remove the harness guide [1].
0019-5936
0019-5937
[2]
[1]
F-11-44
[1]
[2]
F-11-45
[3]
[2]
[1]