Detaching And Refitting The Mp Paper Feed Roller (Duplex Model Only) - Kyocera FS-1100 Service Manual

2H5/2HS

(3) Detaching and refitting the MP paper feed roller (Duplex model only)

Procedure
1. Open the front cover.
2. Pull the MP feed holder (lever) down ( ).
3. Slide the MP feed holder ( ).
4. Remove the MP paper feed roller ( ).
5. Check or replace the MP paper feed roller
and refit all the removed parts.
When refitting the MP paper feed roller, be
sure to align the paper feed roller pivot with
the slotted hole on the MPF feed shaft.
When refitting the MP paper feed roller, be
sure to align the MPF feed shaft pivot with
the slotted hole on the MP paper feed roller.
1-5-10
MP paper feed roller
MP feed holder
Figure 1-5-13
Slotted hole
MP paper feed roller
Figure 1-5-14
Front cover
MP paper feed roller
(Lever)
Pivot
MPF feed shaft