Detaching And Refitting The Mp Paper Feed Roller - Kyocera FS-3040MFP+ Service Manual

(4) Detaching and refitting the MP paper feed roller

Procedure
1. Open the front cover.
2. Remove the developing unit.
(See page 1-5-25)
3. Remove the front cover.
(See page 1-5-3)
4. Pull the MP paper feed tray upwards
until it is removed from the machine.
5. Pull the MP paper feed roller holder. (1)
6. Slide the MP paper feed roller holder.
(2)
7. Remove the MP paper feed roller.
8. Check or replace the MP paper feed
roller and refit all the removed parts.
MP paper feed tray
2
1
MP paper feed roller holder
MP paper feed roller
1-5-10
Figure 1-5-13
Figure 1-5-14
2MF/2MG