2RB/2RC/2RD/2RF/3R6
Notes when attaching
*: When attaching the paper feed holder (a), insert to
set the protrusion (b) into the main unit guide (c).
*: In case that the coupling is not in, insert to turn the
gear.
Figure 4-7
IMPORTANT
When replacing the new pickup holder or retard holder, take care not to touch on the roller surface.
(2) MP paper feed section
(2-1) Detaching and reattaching MP paper feed roller and the MP separation pad
Procedures
1. Pull the cassette (a) out of the main unit (b) in the
direction of the arrow and remove it.
Figure 4-8
4-5