Paper Jam Caused By The Conveying Guide, Paper Entry Guide Or The Feedshift Guide - Kyocera ECOSYS P2235dn Service Manual

(1-4) Paper jam caused by the conveying guide, paper entry guide or the feedshift
guide
Step Check description
1 Checking the paper path
2 Checking the guide
3 Checking the guide
4 Checking the solenoid
(1-5) Paper jam caused by incorrectly loaded paper in the cassette
Step Check description
1 Relocating the paper width
guides
2 Checking the paper
(1-6) Paper jam due to the inferior paper
Step Check description
1 Checking the paper
Assumed cause
The paper is caught with a
piece of paper, etc.
The guide is dirty.
The guide does not cor-
rectly operate due to the
incorrect attachment or a
fault.
The solenoid does not
operate normally.
Assumed cause
The locations of the paper
width guides do not fit with
the paper size.
The paper fanning is not
enough.
Assumed cause
Unspecified papers are
used.
7-3
2RV/2RW/2RX/2RY/3RA
Measures
Remove any piece of torn
paper, foreign objects on the
paper or if there are burrs on
the parts such as the guide
and actuator, remove them.
If the guide or the separation
needles are dirty with toner or
paper dust, etc., clean them
with a dry cloth or a brush.
Check the guide, remove if
there are some burrs. Reat-
tach the guide if it is not
moved smoothly manually. If
not repaired, deformed or
worn out after that, replace it.
Check the operation of the
guide with the operation
sound and manual opera-
tion. If the guide is not oper-
ated or is not smooth,
reattach it. if not repaired,
replace the solenoid.
Measures
Relocate the paper width
guides or the MP paper width
guides along the paper size
when the paper skew or the
paper creases occur.
After fanning paper, load it
again If paper is bent, remove
it.
Measures
Explain to the user to use the
paper within the specifica-
tions.
Reference
Reference
Loading
paper
Reference
Paper
specifica-
tion