Adjust/Maint. (Adjust/Maintenance Selection/Setting) - Kyocera Ecosys FS-C8650DN Operation Manual

Adjust/Maint. (Adjust/Maintenance selection/setting)

Adjust/Maintenance is used to adjust the print quality and to carry out printer maintenance.
The options available in Adjust/Maintenance are as follows:
• ColorCalib.Cycle (Automatic color adjustment cycle setting)...6-119
• ColorCalibration...6-120
• Color Regist. (Color registration [Standard])...6-120
• Color Regist. (Color registration [Detailed])...6-123
• Restart (Restart Printer)...6-127
• Service Setting (for Maintenance)...6-128
IMPORTANT Service Setting is primarily a menu used by service personnel for maintenance work. There is no
need for customers to use this menu.
Adjust/Maint.:
********************- 1
ColorCalib.Cycle
2
ColorCalibration
3
Color Regist.
ColorCalib.Cycle (Automatic color adjustment cycle setting)
The cycle for automatic execution of color calibration can be selected. The following cycles can be set:
Auto
Short
Standard
Long
ColorCalib.Cycle:a b
1 *Auto ********************-
2
Short
3
Standard
1
2
3
a b
[ Exit ]
Automatic judging and adjustment.
Gives priority to image quality. The color adjustment cycle is shorter
than Standard.
Gives equal priority to image quality and printing processing.
Gives priority to printing processing. The color adjustment cycle is
longer than Standard.
1
2
[ Exit ]
3
4
Press [Menu].
Press or to select Adjust/Maint..
Press [OK]. The Adjust/Maint. menu appears showing a list of
available options.
In the Adjust/Maint. menu screen, press
ColorCalib.Cycle.
Press [OK]. The ColorCalib.Cycle screen appears.
Press or to select the color adjustment cycle.
Press [OK]. The color adjustment cycle is set and the Adjust/
Maint. menu screen reappears.
6-119
Operation Panel
or to select