Adjust/Maint. (Adjust/Maintenance Selection/Setting) - Kyocera ECOSYS P4040dn Operation Manual

Adjust/Maint. (Adjust/Maintenance selection/setting)

Adjust/Maintenance is used to adjust the print quality and to carry out printer maintenance.
The options available in Adjust/Maintenance are as follows:
• Quiet Mode (Setting the Quiet Mode)...4-130
• Restart (Restart Printer)...4-131
• Service Setting (for Maintenance)...4-132
IMPORTANT Service Setting is primarily a menu used by service personnel for maintenance work. There is no
need for customers to use this menu.
Adjust/Maint.:
01 Quiet Mode
Restart
02
Service Setting
03
Quiet Mode (Setting the Quiet Mode)
Lower print speed for quiet processing.
Options available in Quiet Mode are as follows:
• Quiet Mode (Selecting the Quiet Mode)...4-130
• Each Job (Permission for settings for each jobs)...4-131
Quiet Mode:
Quiet Mode
01
02 Each Job
Quiet Mode (Selecting the Quiet Mode)
Set the Quiet Mode. Select this mode when the running noise is uncomfortable.
Note The processing speed will be slower than normal when in Quiet Mode.
Quiet Mode:
01 * Off
On
02
1
Press [Menu].
2
Press
3
Press [OK]. The Adjust/Maint. menu appears showing a list of
available options.
Exit
1
In the Adjust/Maint. menu screen, press
Mode.
2
Press [OK]. The Quiet Mode menu appears showing a list of
available options.
Exit
1
In the Quiet Mode menu screen, press
Mode.
2
Press [OK]. The [Quiet Mode] menu appears.
3
Press
4
Press [OK]. The Quiet Mode is set and the Quiet Mode menu
screen reappears.
or to select Adjust/Maint..
or to select Off or On.
4-130
Operation Panel
or to select Quiet
or to select Quiet