U324 Setting The Main Charger Cleaning Indication; U326 Setting The Black Line Cleaning Indication - Kyocera KM-2560 Service Manual
Hide thumbs
Also See for KM-2560:
- Service manual (392 pages) ,
- Advanced operation manual (318 pages) ,
- Operation manual (248 pages)
Table of Contents
Advertisement
2H0/2HZ
Maintenance
item No.
Setting the main charger cleaning indication
U324
Description
Sets whether to display the main charger cleaning guidance.
Purpose
Set according to the preference of the user.
Setting
1. Press the start key.
2. Select ON or OFF.
Display
ON
OFF
Initial setting: ON
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Setting the black line cleaning indication
U326
Description
Sets whether to display the cleaning guidance when detecting the black line.
Purpose
Displays the cleaning guidance in order to make the call for service with the black line decrease by the rubbish
on the platen when scanning from the DP.
Setting
1. Press the start key.
2. Select ON or OFF.
Display
ON
OFF
COUNT
Initial setting: ON
3. Press the start key. The setting is set.
Setting the count value
1. Enter a count using the +/- or numeric keys.
Setting range: 0 to 999
Initial setting: 8
When setting is 0, the black line cleaning indication is displayed only if the black line is detected.
2. Press the start key. The count is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-60
Description
Description
Displays the main charger cleaning guidance
Not to display the main charger cleaning guidance
Description
Displays the cleaning guidance
Not to display the cleaning guidance
Setting counts of the cleaning guidance indication
Advertisement
Table of Contents
