U032 Checking Clutch Operation; U033 Checking Solenoid Operation; U034 Adjusting The Print Start Timing - Kyocera KM-3035 Service Manual

2FD/2FF/2FG
Maintenance
item No.
U032 Checking clutch operation
Description
Turns each clutch on.
Purpose
To check the operation of each clutch.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the clutch to be operated. The selected item is displayed in reverse, and the clutch turns on for 1 s.
Display
PF1
PF2
PFBYP
FEED1
FEED2
FEED3
BYPF
RES
DUPF
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U033 Checking solenoid operation
Description
Turns each solenoid on.
Purpose
To check the operation of each solenoid.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the solenoid to be operated. The selected item is displayed in reverse, and the solenoid turns on for
1 s.
Display
TONER SOL
BRANCH1 SOL
BRANCH2 SOL
MAIN SW SOL
*Optional.
Select MAIN SW SOL to check the operation of the power switch in auto shut off.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U034 Adjusting the print start timing
Adjustment
See pages 1-6-10 and 12.
1-4-20
Description
Clutches
Upper paper feed clutch (PFCL-U)
Lower paper feed clutch (PFCL-U)
Bypass paper feed clutch (BYPPFCL)
Feed clutch 1 (FCL1)
Feed clutch 2 (FCL2)
Feed clutch 3 (FCL3)
Bypass feed clutch (BYPFCL)
Registration clutch (RCL)
Duplex feed clutch (DUPFCL)
Solenoids
Toner feed solenoid (TNFSOL)
Feedshift solenoid (FSSOL)
Feedshift solenoid (FSSOL)*
Power switch turns on