3.9
Adjustment of Developer Unit
3.9.1
Doctor-to-sleeve gap
Adjustment tool to use: Doctor-sleeve jig
(1)
Take out the developer unit from the equip-
ment.
(2)
Take off the developer material cover and
discharge the developer material.
(3)
Remove 2 screws and take off the developer
sleeve cover.
(4)
Loosen 4 screws fixing the doctor blade.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 3-47
Screw
Fig. 3-48
Screw
Fig. 3-49
3 - 49
Developer
material cover
Developer sleeve
cover
Screw
Doctor blade
Developer
sleeve
e-STUDIO350/352/353/450/452/453
ADJUSTMENT
3