Toshiba e-STUDIO350 Service Handbook page 488

[ED10] Skew adjustment motor (M1) home position detection abnormality
MJ-1101 (When MJ-6101 is installed)
Is there any paper remaining on the transport path?
YES Remove the paper.
NO
Rotate the skew adjustment motor (M1). Does it rotate smoothly?
NO Fix the mechanism.
YES
Are the skew home position sensor (S2) and its wiring correct?
NO Replace the sensor. Correct the wiring.
YES
Is the wiring between the hole punch control PC board (HP) and skew adjustment motor (M1)
correct?
NO Correct the wiring.
YES
1) Replace the skew adjustment motor (M1).
2) Replace the hole punch control PC board (HP).
[ED11] Sideways adjustment motor (M2) home position detection error
MJ-1101 (When MJ-6101 is installed)
Is there any paper remaining on the transport path?
YES Remove the paper.
NO
Rotate the sideways adjustment motor (M2). Does it rotate smoothly?
NO Fix the mechanism.
YES
Are the sideways deviation home position sensor (S3) and its wiring correct?
NO Replace the sensor. Correct the wiring.
YES
Is the wiring between the hole punch control PC board (HP) and punch sideways adjustment
motor (M2) correct?
NO Correct the wiring.
YES
1) Replace the sideways adjustment motor (M2).
2) Replace the hole punch control PC board (HP).
e-STUDIO350/352/353/450/452/453
TROUBLESHOOTING
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
5 - 52
07/11